An Organic Solid State Injection Laser

J. H. Schön, Ch. Kloc, Ananth Dodabalapur, B. Batlogg

Science · 2000 · 223 citations · 21 references

Concepts

TL;DR

The study reports electrically driven amplified spontaneous emission and lasing in tetracene single crystals using field‑effect electrodes for efficient electron and hole injection. Laser action is achieved by a Fabry‑Perot resonator formed by reflections at the crystal edges, with high electron and hole mobilities and balanced charge injection enhancing exciton generation, and reduced charge‑induced absorption in high‑quality single crystals. Increasing the injected current density above a threshold narrows the emission spectral width from 120 meV to less than 1 meV due to gain narrowing, culminating in laser action.

Abstract

We report on electrically driven amplified spontaneous emission and lasing in tetracene single crystals using field-effect electrodes for efficient electron and hole injection. For laser action, feedback is provided by reflections at the cleaved edges of the crystal resulting in a Fabry-Perot resonator. Increasing the injected current density above a certain threshold value results in the decreasing of the spectral width of the emission from 120 millielectron volts to less than 1 millielectron volt because of gain narrowing and eventually laser action. High electron and hole mobilities as well as balanced charge carrier injection lead to improved exciton generation in these gate-controlled devices. Moreover, the effect of charge-induced absorption is substantially reduced in high-quality single crystals compared with amorphous organic materials.

References

21