Analytical Methods · 2013 · 16 citations · 32 references
Natural SciencesChemistryEnvironmental EngineeringAnalytical ChemistryElemental AnalysisSeparation ScienceExtraction TechniquesInstrumental AnalysisLiquid-liquid ExtractionMineral AnalysisSolvent ExtractionCalibration Curve AnalysisDispersive MediaExtraction Of Organic CompoundsMethod Detection LimitMicroextractionPreconcentrationSample PreconcentrationSpeciation In Water Samples
A new, efficient, fast and simple method for iron determination in environmental water samples with different salinities by a dispersive liquid–liquid microextraction method, followed by UV-Vis spectrophotometric determination, was developed. In this study, Fe was complexed with ammonium pyrrolidinedithiocarbamate and extracted into 1,2-dichlorobenzene droplets after the injection of a mixture composed of 1,2-dichlorobenzene (extraction solvent) and ethanol (dispersive solvent) into the sample solution. Factors which affected the efficiency of Fe extraction and its subsequent spectrophotometric determination were studied and optimized. Under optimized conditions, the calibration curve was linear and ranged from 0.02 to 2.5 mg L−1 (r = 0.999). The limits of method detection and quantification were 6.1 and 18.3 μg L−1, respectively, with a preconcentration factor of 3.3. The accuracy evaluated in terms of recovery was between 90 and 100% with RSD lower than 12%. In addition, a certified reference material (SRM 1643e, Trace Elements in Water) was analyzed with agreement of 104% and RSD about 5%. The method was applied to total Fe determination in environmental water samples with different salinities and satisfactory results were obtained.
32
Complexation reactions of dithiocarbamates
Adam Hulanicki · Talanta · 1967 · 289 citations
Mohammad Mirzaei, Mansoureh Behzadi, Nasrin Mahmoud Abadi et al. · Journal of Hazardous Materials · 2010 · 190 citations
Mohammad Taghi Naseri, Payam Hemmatkhah, Mohammad Hosseini et al. · Analytica Chimica Acta · 2008 · 148 citations