International Journal of Cast Metals Research · 2009 · 13 citations · 4 references
EngineeringMaterials EngineeringMechanical EngineeringHeat TransferThermal AnalysisTransport PhenomenaCastingCooling SystemsHeat Transfer AnalysisHeat Transfer ModelingAir-water InterfacesContinuous CastingHeat Transfer CoefficientsHeat Transfer MechanismsSpray CoolingSpray NozzlesSpray Pattern ModelingSurface Temperature
AbstractThe spray cooling technology is a key technology in the continuous casting process, which has a significant influence on the surface quality. In order to ensure high quality standards at different operating conditions, modern continuous casting machines provide the possibility to vary the cooling with respect to intensity, width, stand off distances, etc. For calculating the cooling intensity in the engineering process and during caster operation, precise information about the cooling characteristics of spray nozzles is needed. The subject of the present work is the modelling of the spray cooling heat transfer using flat spray air mist nozzles. Measurements of the spray pattern and air/water flows were carried out on a spray test stand in order to investigate the profiles of the water flux density at different air / water pressures and different distances from the nozzle tip to the surface. The heat transfer coefficients due to spray cooling were measured using an experimental stand which allows experiments up to a surface temperature of 1250°C. Based on the obtained experimental data a heat transfer model for air mist sprays is developed to describe the effect of the different operating conditions on the spray cooling heat transfer coefficient.Keywords: CASTINGSECONDARY COOLINGSPRAY COOLINGHEAT TRANSFERPROCESS MODEL
4