Materials and Manufacturing Processes · 2010 · 40 citations · 34 references
EngineeringManufacturing EngineeringDesign OptimizationDrillingOptimizationDrilling OperationsDrilling OptimizationMachiningBox-behnken DesignsDrill Parameter OptimizationDrilling Parameter OptimizationDrilling Parameter SelectionDrilling Performance OptimizationGenetic Algorithm Based DesignGenetic Algorithm OptimizationGenetic Algorithm Variable Selection
This article illustrates an application of response surface methodology (RSM) and genetic algorithm (GA) for selecting the optimum combination values of drilling parameters affecting the burr height in drilling of AISI 304 stainless steel. The purpose of this article is to investigate the influence of the cutting parameters, such as cutting speed and feed rate, and point angle on burr height produced when drilling AISI 304 stainless steel. The experiments were conducted based on the Box–Behnken design. The measured results were collected and analyzed with the aid of a commercial software package Design Expert 6 and Matlab. A mathematical prediction model was developed using RSM) for the burr height. The effects of drilling parameters on the burr height were evaluated using RSM and optimum drilling conditions for minimizing the burr height were determined using GA. The GA optimization results have revealed that the minimum burr height was obtained at lower cutting speed and feed rates while at higher point angle.
34
D. E. Goldberg · Medical Entomology and Zoology · 1989 · 10.1K citations
Genetic Algorithms and Engineering Design
David W. Coit · The Engineering Economist · 1998 · 1.2K citations
Architecture, Industrial Engineering, Design Optimization +14
M.Y. Noordin, V.C. Venkatesh, Safian Sharif et al. · Journal of Materials Processing Technology · 2003 · 738 citations
Burrs—Analysis, control and removal
Jan C. Aurich, David Dornfeld, P.J. Arrazola et al. · CIRP Annals · 2009 · 469 citations · Full text