Analytical Chemistry · 2013 · 121 citations · 29 references
Natural SciencesMaterials EngineeringMaterials ScienceElectrochemistryNanomaterialsNanotechnologyElectroanalytical ChemistryElectrochemical CellsElectrochemical SensorsElectrode MaterialsElectrode-electrolyte InterfacesWorking ElectrodesElectrochemical CharacterizationElectrochemical MeasurementsElectrode DegradationElectrode Degradation MechanismsGlass ElectrodesPlatinum ElectrodesScanning Electrochemical MicroscopyVoltammetry
Glass-sealed Pt electrodes with submicrometer and nanometer size have been successfully developed and applied for nanoscale electrochemical measurements such as scanning electrochemical microscopy (SECM). These small electrodes, however, are difficult to work with because they often lose a current response or give a low SECM feedback in current-distance curves. Here we report that these problems can be due to the nanometer-scale damage that is readily and unknowingly made to the small tips in air by electrostatic discharge or in electrolyte solution by electrochemical etching. The damaged Pt electrodes are recessed and contaminated with removed electrode materials to lower their current responses. The recession and contamination of damaged Pt electrodes are demonstrated by scanning electron microscopy and X-ray energy dispersive spectroscopy. The recessed geometry is noticeable also by SECM but is not obvious from a cyclic voltammogram. Characterization of a damaged Pt electrode with recessed geometry only by cyclic voltammetry may underestimate electrode size from a lower limiting current owing to an invalid assumption of inlaid disk geometry. Significantly, electrostatic damage can be avoided by grounding a Pt electrode and nearby objects, most importantly, an operator as a source of electrostatic charge. Electrochemical damage can be avoided by maintaining potentiostatic control of a Pt electrode without internally disconnecting the electrode from a potentiostat between voltammetric measurements. Damage-free Pt electrodes with submicrometer and nanometer sizes are pivotal for reliable and quantitative nanoelectrochemical measurements.
29
Bo Zhang, Jeremy W. Galusha, Peter G. Shiozawa et al. · Analytical Chemistry · 2007 · 277 citations
Natural Sciences, Materials Engineering, Materials Science +15
Nanometer-Sized Electrochemical Sensors
Yuanhua Shao, Michael V. Mirkin, Galina Fish et al. · Analytical Chemistry · 1997 · 261 citations
Natural Sciences, Materials Engineering, Materials Science +17