Radiation Suppression for Cable-Attached Packages Utilizing a Compact Embedded Common-Mode Filter

Abstract

A compact and wideband common-mode filter is newly proposed to embed in a cable-attached printed circuit board (PCB) or packages for the suppression of the common-mode noise and its resulting electromagnetic interference (EMI) emission from the attached cable. The proposed filter consists of a pair of distributed signal lines on the top of a mushroom-like structure. Owing to its symmetry, an equivalent circuit model is developed and applied efficiently for this filter design. As an example, a filter prototype is designed and fabricated on a multilayer PCB. The filter prototype shows that it can greatly reduce the common-mode noise over 10 dB from 1.65 to 5.2 GHz. In addition, the corresponding fractional bandwidth is over 100% while the electrical size of the prototype is only 0.11 × 0.11 λ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">g</sub> , where λ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">g</sub> is the wavelength of the central frequency of its stopband. Also in the time domain, this filter prototype can reduce over 60% of the unintended noise. More importantly, the differential-signal integrity, in terms of the insertion loss in the frequency domain and the eye diagram in the time domain, is maintained up to 7 GHz. To the best of our knowledge, it is the first embedded common-mode filter proposed for gigahertz differential signals with such a large bandwidth and the most compact size. To further demonstrate the ability of the filter to suppress the common-mode current on the attached cable and the corresponding EMI emission, a test board design is also introduced and realized. From the experimental results related to this test board, a 10-dB suppression on average is indeed achieved.