physica status solidi (a) · 2010 · 23 citations · 14 references
Natural SciencesMaterials SciencePhysicsCondensed Matter PhysicsElectronic MaterialsSemiconductor DevicesConductive MaterialsNoise In Electronic DevicesNoise In Semiconductor DevicesSemiconductor PhysicsThin-film MaterialsTopological MaterialsConductionExcess NoiseExfoliationNoise Power Spectral DensityNoise Spectral DensitySurface StatesTopological InsulatorsTopological Surface States
Abstract We report results of investigation of the low‐frequency excess noise in device channels made from topological insulators – a new class of materials with a bulk insulating gap and conducting surface states. The thin‐film Bi 2 Se 3 samples were prepared by the ‘graphene‐like’ mechanical exfoliation from bulk crystals. The fabricated four‐contact devices had linear current–voltage characteristics in the low‐bias regime | V SD | < 0.1 V. The current fluctuations had the noise spectral density S I ∼1/ f for the frequency f < 10 kHz. The noise density S I followed the quadratic dependence on the drain–source current and changed from about ∼10 −22 to 10 −18 A 2 /Hz as the current increases from ∼10 −7 to 10 −5 A. The obtained data is important for planning transport experiments with topological insulators. We suggest that achieving the pure topological insulator phase with the current conduction through the ‘protected’ surface states can lead to noise reduction via suppression of certain scattering mechanisms. The latter has important implications for implementing the ultra‐low‐power and ultra‐low‐noise electronics.
14