Influence of form Factor of the Cutting Edge on Tool Life during Finishing Milling

Abstract

The article is focused on the influence of the cutting edge form factor, which is usually marked as K, on tool life and roughness of machined surface during finishing milling. The K factors were 0.55, 0.6, 1.6 and 2.5 and were made by drag finishing method. The tool edge rounding was 15 μm. There was used a cutter head with just one indexable insert for finishing machining. The article can answer to question, if the K factor can help to increase the tool performance, because the influence of the asymmetrical form factor will be compared with symmetric form factor, it means K = 1. Tool edge was prepared by the technology of drag finishing.