Journal of Applied Physics · 2008 · 81 citations · 27 references
Natural SciencesMaterials EngineeringMaterials ScienceNanomaterialsNanotechnologySemiconductor MaterialsMetal Oxide NanomaterialsNanostructured SurfacesOxide SemiconductorsSemiconductor Device MaterialsSemiconductor NanomaterialsSemiconductor SurfacesDecay TimeEffective Recombination RateNanorodsOptical PropertiesPhotoluminescencePhotoluminescence SpectroscopySurface RecombinationTime-resolved Photoluminescence Spectroscopy
Vertically well-aligned ZnO nanorods on Si substrates were prepared by a two-step chemical bath deposition (CBD) method. The optical properties of the grown ZnO nanorods were investigated by time resolved photoluminescence spectroscopy. It was found that the effective decay time of the near bandgap recombination in the CBD grown ZnO nanorods strongly depends on the diameter of the ZnO nanorods. Typically, the decay curves obtained from these ZnO nanorods show a combination of two exponential decays. The experimental results show that the fast exponential decay is related to the surface recombination and the slow decay is related to the “bulk” decay. The measured decay time of the effective surface recombination decreases with decreasing diameter, while the bulk decay time remains unchanged. The results also show that an annealing treatment around 500 °C significantly reduces the surface recombination rate. A simple carrier and exciton diffusion equation is also used to determine the surface recombination velocity, which results in a value between 1.5 and 4.5 nm/ps.
27
Zhong Lin Wang · Materials Today · 2004 · 1.4K citations · Full text
Natural Sciences, Materials Engineering, Materials Science +14
Excitonic emissions observed in ZnO single crystal nanorods
Won Il Park, Y. H. Jun, Soonwook Jung et al. · Applied Physics Letters · 2003 · 440 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17