2010 · 54 citations · 13 references
EngineeringComputer EngineeringComputer ScienceComputer ArchitectureField-programmable Gate ArraysLow-power DesignDynamic ReconfigurationField-programmable Gate Array ArchitectureFpga ArchitectureLow-power Fpga DesignPartial ReconfigurationReconfigurable System ArchitectureAdaptive System ArchitectureData Path DesignDynamic Partial ReconfigurationHardware ResourcesPerformance OverheadPower ConsumptionReconfigurable ArchitecturesTemporal Partitioning
Dynamic and partial reconfiguration of Xilinx FPGAs is a well known technique in runtime adaptive system design. With this technique, parts of a configuration can be substituted while other parts stay operative without any disturbance. The advantage is the fact, that the spatial and temporal partitioning can be exploited with the goal to increase performance and to reduce power consumption due to the re-use of chip area. This paper shows a novel methodology for the inclusion of the configuration access port into the data path of a processor core in order to adapt the internal architecture and to re-use this access port as data- sink and source. It is obvious that the chip area, which is utilized by the hardware drivers for the internal configuration access port (ICAP), has to be as small as possible in comparison to the application functionality. Therefore, a hardware design with a small footprint, but with an adequate performance in terms of data throughput, is necessary. This paper presents a fast data path for dynamic and partial reconfiguration data with the advantage of a small footprint on the hardware resources.
13
Power and energy reduction via pipeline balancing
R. Iris Bahar, Srilatha Manne · 2001 · 168 citations
An FPGA run-time system for dynamical on-demand reconfiguration
Michael Ullmann, Michael Hübner, Björn Grimm et al. · 2004 · 153 citations