Applied Physics Letters · 2014 · 18 citations · 21 references
EngineeringMaterials EngineeringMaterials ScienceMicroelectromechanical SystemsMicrofabricationNanotechnologyMems DesignMems FabricationMicrofabrication MaterialsMicromachiningNanoelectromechanical SystemsNanomechanicsCantilever MechanicsConvective TransportLeakageNanoparticlesPhotolithographyPrinting ProcessesPull-in VoltageStiffness
We report a mechanically enhanced inkjet-printed microelectromechanical (MEM) relay with a U-bar-shaped cantilever by exploiting the coffee-ring effect. The printed cantilever shape, especially the effective thickness caused by the elevated walls, can be controlled during the drying process by outward convective flow of silver nanoparticles. This enhances mechanical stiffness to efficiently produce a strongly suspended cantilever that is immune to collapse- and curling-related failures. This approach to enhancing cantilever stiffness is unique to printing-based processes using metal-nanoparticle inks and is not feasible for conventional photolithography processes. The resulting printed MEM relays show a pull-in voltage of only 6.6 V and an on/off ratio of 108 with extremely low on-state resistance (∼14.3 Ω) and off-state leakage that is comparable to those of conventional silicon-based MEM relays.
21
Capillary flow as the cause of ring stains from dried liquid drops
Robert D. Deegan, Olgica Bakajin, Todd F. Dupont et al. · Nature · 1997 · 6.3K citations
Suppression of the coffee-ring effect by shape-dependent capillary interactions
Peter J. Yunker, Tim Still, Matthew Lohr et al. · Nature · 2011 · 1.6K citations
Electrolyte‐Gated Transistors for Organic and Printed Electronics
Se Hyun Kim, Kihyon Hong, Wei Xie et al. · Advanced Materials · 2012 · 947 citations
Natural Sciences, Materials Engineering, Materials Science +17