Determination of Deuterium Diffusion Coefficient in Metals by Ion Driven Permeation Technique

T. Tanabe, Yuichi Furuyama, N. Saitoh, Shosuke Imoto

Transactions of the Japan Institute of Metals · 1987 · 29 citations · 19 references

DOIFull text

Open access

Concepts

Abstract

In order to determine the deuterium diffusion coefficient in metals, we have developed a new technique, ion driven permeation in which the implantation of energetic ions is utilized instead of gaseous charging or electrochemical charging for deuterium permeation.The time sequence of deuterium permeation rate caused by the ion implantation is generally similar to those of the other techniques. The steady state permeation rate and the diffusion coefficient, however, tend to decrease with increasing duration of implantation (or with increasing implanted fluence) because of modifications of the surface or subsurface region, or both, by the bombardment. Therefore, the diffusion coefficients determined from the initial rise of the permeation rate for a fully annealed specimen are reproducible and reliable.The diffusion coefficient thus determined areDCu=8.2×10−8exp(−23.3kJmol−1⁄RT)m2·s−1andDNi=3.9×10−7exp(−38.6kJmol−1⁄RT)m2·s−1for deuterium in Cu and Ni at 500–1000 K, respectively. Both are in agreement with the literature values.Applying this technique to Al and Mo, the deuterium diffusion coefficients are determined to beDAl=1.4×10−6exp(−35.7kJmol−1⁄RT)m2·s−1andDMo=3.2×10−6exp(−54.6kJmol−1⁄RT)m2·s−1.Since energetic deuterium is implanted directly into the bulk, the experimental value for Al seems not to be influenced by the surface oxide, whereas that for Mo is possibly influenced by defects produced by the bombardment.

References

19