IEEE Transactions on Power Electronics · 2014 · 133 citations · 22 references
EngineeringElectrical EngineeringLow-power DesignMicroelectronicsPower ElectronicsCmos Circuit DesignConverter TopologiesDevice ScalingIntegrated Circuit DesignPower ManagementResonant ConvertersCmos ScalingConverter Topology DesignConverter Topology OptimizationEnergy DensityInductorsPower DensityPower Management SystemsSwitched-capacitor Converters
There is an increasing need for power management systems that can be fully integrated in silicon to reduce cost and form factor in mobile applications, and provide point-of-load voltage regulation for high-performance digital systems. Switched-capacitor (SC) converters have shown promise in this regard due to relatively high energy-density of capacitors and favorable device utilization figures of merit. Resonant switched-capacitor (ReSC) converters show similar promise as they benefit from many of the same architectures and scaling trends, but also from ongoing improvements in mm-scale magnetic devices. In this study, we explore the design and optimization of 2:1 step-down topologies, based on representative capacitor technologies, CMOS device parameters, and air-core inductor models. We compare the SC approach to the ReSC approach in terms of efficiency and power density. Finally, a chip-scale ReSC converter is presented that can deliver over 4 W at 0.6 W/mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> with 85% efficiency. The two-phase, nominally 2:1 converter supports input voltages from 3.6-6.0 V, and is implemented in 180-nm bulk CMOS with die-attached air-core solenoid inductors.
22
Opportunities and Challenges in Very High Frequency Power Conversion
David J. Perreault, Jingying Hu, Juan Rivas-Davila et al. · 2009 · 464 citations · Full text