IEEE Transactions on Microwave Theory and Techniques · 1979 · 21 citations · 12 references
EngineeringElectrical EngineeringAnalog ElectronicsMicroelectronicsSemiconductor DevicesComplementary Metal-oxide-semiconductor TechnologyHigh-frequency Semiconductor DevicesNoise In Analog CircuitsNoise In Electronic DevicesNoise In Semiconductor DevicesRadio-frequency Integrated CircuitsComplementary Metal-oxide-semiconductor DevicesGaas OscillatorsInjection LockingNoise In High-frequency Semiconductor DevicesSchottky Barrier DiodesSignal Amplification Mechanisms
Transmission-type injection-locked oscillators equipped with both signal-input and power-output ports are studied. A comparison with traditional reflection-type injection-locked oscillators, in which a signal is injected into the output port of the oscillator, is presented theoretically. It is shown that the Iocking range of transmission types always differs from the reflection type by a factor of G/sub s// G/sub p/ where G/sub s/ represents the maximum stable gain of the two-port oscillator and G/sub p/ represents the square root of the output power ratio of the two ports. Experiments on common-source injection-locked oscillators using GaAs FET chips are described and show that, with transmission types, a 1.8 times wider Iocking range can be obtained than with reflection types. Furthermore, investigation of FM noise for both types of injection revealed lower off-carrier FM noise for transmission types than reflection types, even though the Iocking gain of the transmission types was kept the same as that of reflection types. Thus overall features of transmission-type injection locking were found to be advantageous for FM signal amplification even though there is a minimal power loss at the signal input port.
12
A Study of Locking Phenomena in Oscillators
R. Adler · Proceedings of the IRE · 1946 · 1.6K citations