Journal of Applied Physics · 2007 · 23 citations · 18 references
Natural SciencesMaterials EngineeringMaterials ScienceOptical MaterialsPolymer ChemistryThin FilmsHumidity SensorsOptical PolymersOptical Thin FilmsPolymer Thin FilmsRefractive IndexThin Film Optical PropertiesAttenuated Total ReflectanceHumidityHumidity Sensing MaterialsHumidity Sensor MaterialsOptical Humidity SensorsThin Film StabilityThin-film Humidity SensorsThin-film Refractive Index
Humidity induced changes in the refractive index and thickness of polyethylene glycol (PEG) thin films are in situ determined by optical waveguide spectroscopy. PEG brushes are covalently attached to the surface of a thin gold film on a borosilicate crown glass using a grafting-from chemical synthesis technique. The measurements are carried out in an attenuated total internal reflection setup. At low humidity levels, both the refractive index and the thickness change gradually due to swelling of the PEG thin films upon water intake. At around 80% relative humidity, a steep decrease in the refractive index and a steep increase in the thickness are observed as a result of a phase change from a semicrystalline state to a physical gel state. The hydrogenation of PEG films causes a less pronounced phase change from a semicrystalline state to a gel state. Due to fewer ether oxygen atoms available for the water molecules to make hydrogen bonding, the polymer has a more stable structure than before and the phase change is observed to shift to higher humidity levels. It is discussed that such a humidity induced change in the index of refraction can be utilized in constructing a PEG based humidity sensor.
18
Measurement of Thin Film Parameters with a Prism Coupler
R. Ulrich, R. Torge · Applied Optics · 1973 · 955 citations
Polymer Layers through Self-Assembled Monolayers of Initiators
Oswald Prucker, Jürgen Rühe · Langmuir · 1998 · 261 citations