High-<tex>$k$</tex>Al<tex>$_2$</tex>O<tex>$_3$</tex>Gate Dielectrics Prepared by Oxidation of Aluminum Film in Nitric Acid Followed by High-Temperature Annealing

Abstract

A simple, cost-effective, and room temperature process was proposed to prepare high-k gate dielectrics. An aluminum oxide (Al/sub 2/O/sub 3/) gate dielectric was prepared by oxidation of ultrathin Al film in nitric acid (HNO/sub 3/) at room temperature then followed by high-temperature annealing in O/sub 2/ or N/sub 2/. The substrate injection current behavior and interface trap-induced capacitance were introduced to investigate the interfacial property between the gate dielectric and Si substrate. Al/sub 2/O/sub 3/ gate dielectric MOS capacitors with and without initial SiO/sub 2/ layers were characterized. It was shown that the Al/sub 2/O/sub 3/ gate dielectrics with initial oxide exhibit better electrical properties than those without. The 650/spl deg/C N/sub 2/-POA Al/sub 2/O/sub 3/-SiO/sub 2/ sample with an equivalent oxide thickness of 18 /spl Aring/ exhibits three orders of magnitude reduction in gate leakage current in comparison with the conventional thermal SiO/sub 2/ sample.