Materials · 2010 · 44 citations · 21 references
Natural SciencesMaterials EngineeringMaterials ScienceEnergy MaterialsHeat TransferThermodynamicsEnergy ConversionSolar Cell MaterialsSolar Energy SystemsSolar RadiationThermal Properties Of MaterialsThermoelectric MaterialsEnergy Conversion EfficiencyHigh-power ConversionOxide ThermoelectricsPower Conversion EfficiencySolar-to-thermal Conversion EfficiencyTemperature ConversionThermoelectric Energy ConversionThermoelectric Properties
The direct conversion of concentrated high temperature solar heat into electrical energy was demonstrated with a series of four–leg thermoelectric oxide modules (TOM). These temperature stable modules were not yet optimized for high efficiency conversion, but served as proof-of-principle for high temperature conversion. They were constructed by connecting two p- (La1.98Sr0.02CuO4) and two n-type (CaMn0.98Nb0.02O3) thermoelements electrically in series and thermally in parallel. The temperature gradient ΔT was applied by a High–Flux Solar Simulator source (HFSS) which generates a spectrum similar to solar radiation. The influence of the graphite layer coated on the hot side of the Al2O3 substrate compared to the uncoated surface on ΔT, Pmax and η was studied in detail. The measurements show an almost linear temperature profile along the thermoelectric legs. The maximum output power of 88.8 mW was reached for a TOM with leg length of 5 mm at ΔT = 622 K. The highest conversion efficiency η was found for a heat flux of 4–8 W cm-2 and the dependence of η on the leg length was investigated.
21
Solar thermochemical production of hydrogen––a review
Aldo Steinfeld · Solar Energy · 2004 · 1.3K citations
Thermoelectrics: Direct Solar Thermal Energy Conversion
Terry M. Tritt, H. Böttner, Lidong Chen · MRS Bulletin · 2008 · 360 citations · Full text