Materials science forum · 2005 · 13 citations · 11 references
EngineeringMaterials SciencePhysicsFluid DynamicsFluid MechanicsRheologyFluid PropertiesParticle-laden FlowsSolid-liquid InterfacesCritical VelocityImpact ModelingImpact VelocityLiquid PenetrationParticle-liquid InteractionsPenetration MechanicsPenetration TheoryWeber Number
Penetration of model solid particles (polymer, teflon, nylon, alumina) into transparent model liquids (distilled water and aqueous solutions of KI) were recorded by a high speed (500 frames per second) camera, while the particles were dropped from different heights vertically on the still surface of the liquids. In all cases a cavity has been found to form behind the solid particle, penetrating into the liquid. For each particle/liquid combination the critical dropping height has been measured, above which the particle was able to penetrate into the bulk liquid. Based on this, the critical impact particle velocity, and also the critical Weber number of penetration have been established. The critical Weber number of penetration was modelled as a function of the contact angle, particle size and the ratio of the density of solid particles to the density of the liquid.
11
Laser melt injection in aluminum alloys: on the role of the oxide skin
J.A. Vreeling, V. Ocelı́k, Yutao Pei et al. · Acta Materialia · 2000 · 109 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +13