2014 · 33 citations · 0 references
EngineeringAerospace EngineeringMechanical EngineeringAerodynamicsComputational Fluid DynamicsFluid DynamicsCombustion FundamentalsEngine DesignGas Turbine CombustionGas Turbine EnginesCombustion Chamber Heat TransferLean Combustion EffectsPressure Profile AnalysisSwirlSwirl EffectsSwirl FlowTotal PressureTurbine Design
Further improvements of gas turbine design can be expected if realistic turbine inlet conditions are applied. These include discrete swirl cores and hot spots which exit from the combustion chamber. A large scale turbine rig is currently reconfigured at Technische Universität Darmstadt to analyse the effect of realistic swirl intensity on turbine flow and heat transfer. A comparison is to be made between swirling and axial inflow conditions. The swirl generator causes a recirculation zone inside the combustion chamber. As a result, the total pressure at turbine inlet is reduced at midspan and increased near the end walls. In addition, incidence angles of ±15° occur at hub and casing of the nozzle guide vane (NGV). This swirl and the shape of the pressure profile are typical for modern lean combustion concepts which are relevant to reduce emissions like NOX. During the design of the test rig, computational flow simulations are carried out. Different swirl orientations and clocking positions are investigated in advance. Depending on these parameters, there is a potential of 0.5 % efficiency between the optimal and the worst configuration. Comparing swirling with axial inflow conditions, an efficiency deficit of more than 2 % has been found which is mainly due to the increased turbulence level for swirling flow. In addition, heat transfer through the NGV hub is increased by approximately 20%. This paper aims for understanding the generation of these aerodynamic and thermal losses to allow for their elimination in future engine designs. Therefore, the most complex case of a realistic swirl generator is successively simplified towards a case with axial inflow: Two-dimensional inflow conditions including discrete swirl and loss cores are compared to radial distributions of inflow variables and globally constant values. The influence of swirling inflow, total pressure profile and turbulence level are simulated separately in order to identify their individual impact on aerodynamic and thermal losses.