IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · 2012 · 24 citations · 22 references
Natural SciencesMaterials EngineeringMaterials ScienceAcousticsUltrasonographyUltrasoundAcoustic MaterialsTransducer TechnologyUltrasonicsUltrasound ImagingUltrasound InstrumentationUltrasound PhysicsCrosstalkCrosstalk ReductionLinear Array TransducersSingle-element TransducersTransducersUltrasonic Transducer ArraysUltrasonic TransducersUltrasound Transducer Design
The goal of this research was to develop a novel diced 1-3 piezocomposite geometry to reduce pulse-echo ring down and acoustic crosstalk between high-frequency ultrasonic array elements. Two PZT-5H-based 1-3 composites (10 and 15 MHz) of different pillar geometries [square (SQ), 45° triangle (TR), and pseudo-random (PR)] were fabricated and then made into single-element ultrasound transducers. The measured pulse-echo waveforms and their envelopes indicate that the PR composites had the shortest -20-dB pulse length and highest sensitivity among the composites evaluated. Using these composites, 15-MHz array subapertures with a 0.95λ pitch were fabricated to assess the acoustic crosstalk between array elements. The combined electrical and acoustical crosstalk between the nearest array elements of the PR array subapertures (-31.8 dB at 15 MHz) was 6.5 and 2.2 dB lower than those of the SQ and the TR array subapertures, respectively. These results demonstrate that the 1-3 piezocomposite with the pseudo-random pillars may be a better choice for fabricating enhanced high-frequency linear-array ultrasound transducers; especially when mechanical dicing is used.
22
Jonathan M. Cannata, Timothy A. Ritter, Wo-Hsing Chen et al. · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · 2003 · 345 citations