Proportional resonant individual pitch control for mitigation of wind turbines loads

Abstract

This study addresses the mitigation of wind turbine loads and fatigue such as blade bending moments, tilt and yaw moments etc. Currently, the wind turbine blades are normally controlled to turn collectively to limit the excess of wind power above rated wind speed conditions without any load attenuation. The individual pitch control (IPC) is a promising way to reduce the wind turbine loads. This study presents a proportional resonant (PR) IPC, which does not need the measurement of blade azimuth angle and multiple complex Coleman transformations between rotational coordinate frame and stationary coordinate frame. The new strategy can attenuate the 1 p and higher harmonics on the wind turbine blades as well as 3 p on the hub without any filters. The wind turbine code fatigue, aerodynamics, structures and turbulence is applied to a doubly fed induction generator‐based wind power generation system. The simulations are performed on the National Renewable Energy Laboratory 1.5 MW upwind reference wind turbine model. The simulation results are presented and discussed to demonstrate the capability and effectiveness of the proposed PR IPC method.