Electrophoresis · 2011 · 13 citations · 20 references
PharmacyChemistryPharmacologyAnalytical ChemistryElectroanalytical MethodsSeparation ScienceAnalytical ChromatographyBioanalytical Method ValidationChromatographyElectrolyte AnalysisInstrumental AnalysisNeuromuscular Blocking AgentsAnalytical ElectrophoresisCalibration CurvesCapillary ElectrophoresisCapillary Electrophoresis Method DevelopmentConcentrationElectrolyte Analysis In Body FluidsInternal Standard Analysis
A novel capillary electrophoretic method for the separation of pancuronium (PM) and vecuronium (VM) ions utilizing capacitively coupled contactless conductivity detection was devised and validated. The separation was carried out in bare fused-silica capillaries (50 μm id, 75/45 cm) at 25°C. Optimal BGE was 50 mM borate buffer of pH 9.5 containing 12.5 mg/mL of (2-hydoxypropyl)-γ-CD. The samples were injected hydrodynamically at 1000 mbar for 3 s. Separation was performed at +30 kV. Under such conditions the PM and VM were base-line resolved and the separation took < 4 min. For quantification phenyltrimethylammonium iodide was used as internal standard. Calibration curves were linear for both pancuronium bromide (PMB) and vecuronium bromide (VMB) in the range 25-250 μg/mL with r> 0.9968. The limits of detection were 7 and 6 μg/mL for PMB and VMB, respectively. The accuracy tested by recovery experiment at three concentration levels of added PMB and VMB was satisfactory (95.7-102.7%, n =3, with RSD < 2.61%). The method was successfully applied to the assay of PMB and VMB in commercial injection solutions.
20
Contactless Conductivity Detection for Capillary Electrophoresis
Andreas Zemann, E. Schnell, Dietmar Volgger et al. · Analytical Chemistry · 1998 · 538 citations