Journal of The Electrochemical Society · 1990 · 15 citations · 0 references
Natural SciencesMaterials EngineeringMaterials ScienceElectrochemistrySurface ScienceThin FilmsCoating TechnologyCoatingsElectrode MaterialsPorosity CharacterizationSurface CharacterizationSurface CoatingsAnodic PolarizationCoating CharacterizationCoating ThicknessElectrochemical MeasurementsElectrocoatingElectrode CoatingsPorosityPotentiodynamic Polarization
An electrochemical method has been developed to test the porosity in nickel coatings deposited on a CuSn6 substrate. The number of coulombs measured uring an anodic potentiodynamic polarization of coated samples in a Na2SO4 § Ro-chelle salt solution is associated with the area of uncoated substrate material. This provides an index of the coating poros-ity, based on which the porosity can be assessed and compared quantitatively, for coatings produced under different plat-ing conditions related, e.g., to substrate conditions and coating thickness. Many techniques have been developed to assess the po-rosity of coatings; however, every available test has its in-herent limitations and none is entirely satisfactory and universal. With the further development of thin coating technology, the demand for a reliable and unambiguous porosity test method is real. Porosity tests reported in the literature fall into two categories: 1)pore detection tests in which individual pore sites are observed by physical, chemical, or electrochemical methods, the inspection and