EFFECT OF ANNEALING TEMPERATURE ON HARDNESS AND WEAR RESISTANCE OF ELECTROLESS<font>Ni</font>–<font>B</font>–<font>Mo</font>COATINGS

İhsan Gökhan Serin, Ali Gökşenli

Surface Review and Letters · 2015 · 33 citations · 40 references

Concepts

Abstract

Formation of nickel–boron–molybdenum ( Ni – B – Mo ) coating on steel by electroless plating and evaluation of their morphology, hardness and tribological properties post heat treatment at different temperatures for 1 h is investigated. The 25 μm thick coating is uniform and adhesion between the substrate and coating is good. Ni – B – Mo coating was amorphous-like structure in their as-plated condition and by 400°C heat-treated coating, nickel fully crystallized and nickel borides and molybdenum carbide were formed. All coatings exhibited higher hardness than the substrate steel. Hardness values of all coatings up to 400°C did not change distinctively but decreased partly beyond 400°C. Friction coefficient reached lowest value post heat treatment at 300°C but later increased with increasing tempering temperature. Wear resistance was lowest in as-plated coating; however it reached the highest value at 300°C. Worn surface of the coatings showed the abrasive wear as the dominant wear mechanism. An additional adhesive wear mechanism was detected in coating tempered at 550°C. Moreover, our results confirmed that the molybdenum addition improved the thermal stability of the resulting coating. Therefore, Ni – B – Mo coating has potential for application in precision mould, optical parts mould or bipolar plates, where thermal stability is essential.

References

40