Materials and Corrosion · 2005 · 28 citations · 18 references
Natural SciencesMaterials EngineeringMaterials ScienceCorrosion ScienceElectrochemistrySurface ScienceCorrosion EngineeringCorrosion InhibitorsCorrosion MechanismsCorrosion ResistanceCorrosion-resistant MaterialsElectrochemical CorrosionCorrosion Inhibition MechanismsCorrosion Inhibitor EffectsElectrochemical Impedance AnalysisElectrochemical Inhibition MechanismsPit InitiationPolarizationPolarization CurvesPotentiodynamic Polarization
The influence of chloride ions on the corrosion of AZ91 magnesium alloy in water/ethylene glycol solutions and the inhibiting effect of lactobiono-tallowamide (LTA) were investigated using electrochemical and surface analysis methods. Potentiodynamic polarization curves in aqueous solution of ethylene glycol (50:50w%) containing 0.1 g.L−1 chloride and up to 0.5 g.L−1 LBT were obtained at room and at elevated temperatures. The chloride anions showed a distinct deteriorating effect as they caused pit initiation and accelerated the dissolution of the tested alloy. The selected organic compound demonstrated good protective properties against corrosion of AZ91 magnesium alloy and behaved as inhibitor of mixed type hindering both the cathodic and the anodic partial reactions. It showed inhibition efficiency of 77% at relatively low concentration of 0.2 g.L−1 and was considered as a promising corrosion inhibitor. The mechanism of inhibition was discussed on the basis of the electrochemical impedance spectroscopy (EIS) and XRD analysis of the surface.
18
The anodic dissolution of magnesium in chloride and sulphate solutions
Guang‐Ling Song, Andrej Atrens, DH St John et al. · Corrosion Science · 1997 · 879 citations
Corrosion behaviour of AZ21, AZ501 and AZ91 in sodium chloride
Guang‐Ling Song, Andrej Atrens, Xianliang Wu et al. · Corrosion Science · 1998 · 836 citations
Natural Sciences, Materials Engineering, Materials Science +14
G. L. Makar, J. Krüger · International Materials Reviews · 1993 · 777 citations
Natural Sciences, Materials Engineering, Materials Science +17