Polymer Engineering and Science · 2006 · 65 citations · 10 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsPolymer CharacterizationPolymer Phase BehaviorPolymer Physical ChemistryPolymer PhysicsPolymer ProcessingPolymer RheologyPhase AnglePhase Angle AnalysisPolymer Melt ViscosityRheological CharacterizationRheological MeasurementsRheological PropertiesThermal PropertiesViscosity
Abstract The thermal and rheological behaviors of cyclic butylene terephthalate (CBT) were studied with differential scanning calorimetry (DSC) and plate–plate rheometry, respectively. DSC scans were taken at different heating rates. The related first‐heat thermograms indicated crystallization and melting of the resulting poly (butylene terephthalate) (PBT) only at very low heating rate (0.5°C/min). As the crystallization and melting enthalpies were closely matched, one could conclude that the polymerization is essentially athermic. The polymerization was accompanied by a steep increase of the melt viscosity in isothermal rheological tests performed in the temperature range T = 145–210°C. Changes in the viscoelasticity of the polymerizing CBT and crystallizing PBT could be best followed by considering the changes in the phase angle. Viscosity increased with the conversion exponentially in the first approximation. POLYM. ENG. SCI., 46:743–750, 2006. © 2006 Society of Plastics Engineers
10
Amiya R. Tripathy, Wenjie Chen, Stephen N. Kukureka et al. · Polymer · 2003 · 58 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +12