Investigation of Industrial Environmental Influences on Clock Sources and their Effect on the Synchronization Accuracy of IEEE 1588

Sebastian Schriegel, Jürgen Jasperneite

2007 · 32 citations · 4 references

Concepts

TL;DR

Industrial devices operate under strict temperature, noise, and mechanical load limits, and while environmental effects on clock frequency stability are well studied, their impact on IEEE 1588 synchronization—particularly the relationship between frequency drift and sync‑frame period—remains only partially understood. The study proposes a novel measurement method to investigate how environmental factors affect IEEE 1588 synchronization and to derive guidelines for implementing its functional components. Measurements of a crystal oscillator under varying temperature and mechanical loads are performed and compared against industrial communication standards, particularly PROFINET, to assess synchronization performance.

Abstract

Networked Industrial Devices must fulfill requirements regarding temperature ranges, noise immunities, and mechanical loads (e.g. DIN EN 60068-2-6). The effects of these environmental conditions on the stability of the frequency of clock sources are well studied [1, 2]. However the influence on the synchronization characteristics of IEEE 1588 can be derived only partly from these investigations. The dependency between the frequency drift (df /dt) and the transmission period of the synchronization frames T is very important for the achievable accuracy of IEEE 1588-based networks. In order to examine these effects, a novel measuring method is proposed in this paper. The results of exemplary measurements at a crystal oscillator with different temperature and mechanical loads will be discussed. These results are compared with the existing requirements for industrial communication systems, especially for the Industrial Ethernet system PROFINET. The objective is to derive coherences and rules for the implementation of functional components of the synchronization procedure.

References

4