IEEE Transactions on Instrumentation and Measurement · 2015 · 57 citations · 5 references
EngineeringGeophysicsElectromagnetismGeomagnetismGeomaticsCalibrationEquipment CalibrationMagnetic SensorsSensor CalibrationCalibration UncertaintyMagnetic Sensor CalibrationMagnetometer CalibrationMagnetometer InstrumentationMagnetometer MeasurementsMagnetometersTest Equipment CalibrationUncertainty Calibration
A calibration procedure for calibrations of triaxial magnetometers is presented. The procedure uses a triaxial Helmholtz coil system and an Overhauser scalar magnetometer and is performed in the Earth's field range. The triaxial coils are first calibrated with the Overhauser magnetometer, and subsequently, a triaxial magnetometer calibration is performed. As opposed to other calibration approaches, neither Earth's field nulling system nor movements of the magnetometer are needed. A real calibration test was carried out-the extended calibration uncertainty was better than 430 ppm in sensitivity and 0.06° in orthogonality.
5
Scalar calibration of vector magnetometers
José M.G. Merayo, Peter Bräuer, F. Primdahl et al. · Measurement Science and Technology · 2000 · 238 citations
rsted pre-flight magnetometer calibration mission
T. Risbo, Peter Bräuer, José M.G. Merayo et al. · Measurement Science and Technology · 2003 · 38 citations
Engineering, Aerospace Engineering, Electrical Engineering +16
Magnetic flux density standard for geomagnetometers
V. Ya. Shifrin, E. B. Alexandrov, T I Chikvadze et al. · Metrologia · 2000 · 28 citations