Journal of The Electrochemical Society · 2001 · 180 citations · 10 references
Natural SciencesMaterials EngineeringMaterials ScienceElectrochemical EngineeringElectrochemistryEnergy MaterialsAnode MaterialsElectrochemical CellsElectrode MaterialsFuel Cell MaterialsFuel CellsSolid-state ElectrolytesCarbon DepositionFuel Cell ElectrodesFuel Cell Polarization BehaviorHigh PerformanceMethanol FuelPower DensitySolid Oxide Fuel CellsZirconia
Anode-supported solid oxide fuel cells with a thin film of yttria-stabilized zirconia (YSZ) as the electrolyte were fabricated. The cells were operated directly on pure methanol and on an equivolume mixture of ethanol and water over a range of temperatures. Power density achieved with methanol was between 0.6 W/cm2 at 650°C and 1.3 W/cm2 at 800°C, and with between 0.3 W/cm2 at 650°C and 0.8 W/cm2 at 800°C. Results were compared with tests on humidified hydrogen as a fuel. No carbon deposition on the Ni-YSZ anode was observed with either methanol or an equivolume solution of ethanol and water as fuels. Differences in performance with different fuels were attributed to differences in anode polarization. © 2001 The Electrochemical Society. All rights reserved.
10
A direct-methane fuel cell with a ceria-based anode
Erica Perry Murray, Tsepin Tsai, Scott A. Barnett · Nature · 1999 · 1.3K citations
A Low-Operating-Temperature Solid Oxide Fuel Cell in Hydrocarbon-Air Mixtures
Takashi Hibino, Atsuko Hashimoto, Takao Inoue et al. · Science · 2000 · 693 citations