The Open Environmental Engineering Journal · 2009 · 12 citations · 23 references
EngineeringChemical EngineeringEnvironmental EngineeringSurface ScienceWastewater TreatmentWater TreatmentAdsorption ProcessesAdsorptive SeparationsHeavy Metal RemovalSurface AdsorptionAdsorbent CharacterizationAdsorption KineticsConcentrationEndothermic TransitionsIsothermsNickel RemovalPh Effects On Metal RemovalRemoval
Carbon slurry, dried in open air, has been used as an adsorbent material for the removal of nickel(II) from aqueous solutions at different experimental conditions in batch adsorption technique. The time required to attain equilibrium was found to be 50 minutes. The effects of initial concentration of Ni(II), particle size of adsorbent, adsorbent dose, temperature and pH on removal of nickel(II) have been studied. The removal was favored at higher pH, the pH value for maximum adsorption being 10.00. Batch adsorption kinetics has been described by the Lagergren equation. Langmuir and Freundlich isotherms were applied and both isotherms were seen to be applicable over the concentration range studied. Thermodynamic parameters indicate the endothermic nature of Ni(II) adsorption on carbon slurry.
23
Removal of copper ions from aqueous solution by tree fern
Yuh‐Shan Ho · Water Research · 2003 · 672 citations
Engineering, Botany, Plant Sciences +11