Journal of Vacuum Science & Technology B Microelectronics Processing and Phenomena · 1983 · 22 citations · 0 references
Natural SciencesMaterials ScienceElectronic MaterialsSurface EngineeringSurface ScienceElectrical CharacterizationElectron Beam PhysicsElectron MicroscopySemiconductor DetectorsSurface ChargeSurface PhysicsElectrostatic Surface PotentialEmission FactorsInsulating CeramicsScanning Electron MicroscopyScanning Electron Microscopy AnalysisScanning Electron Microscopy Surface AnalysisSurface PotentialSurface Potential Measurement
Inspection of uncoated insulating samples in a scanning electron microscope (SEM) is possible by using low beam voltages in order to minimize charging effects. In this paper, the principal parameters affecting the target potential under bombardment by electrons are considered. The influence of primary beam energy and the detector (collector) potential have been investigated. Surface potentials were measured by evaluating the deflection of a ‘‘measuring’’ electron beam which passes parallel above the target surface. The dependence of the surface potential on the incident beam energy and the collector potential has been measured on several materials. Curves obtained for ceramic, glass, copper, and gold are presented. Crossover energies (emission ratio equal to unity) have been determined by these measurements on Au, Cu, Mo, C, Si, GaAs, Sapphire, SiO2, glass, ceramic, and polyimide.