Rheological Properties of Drilling Muds in Deep Offshore Conditions

Benjamin Herzhaft, Yannick Peysson, P. Isambourg, Amaury Delepoulle, Abdoulaye Toure

2001 · 21 citations · 5 references

Concepts

Abstract

Abstract The development of deep and ultra-deep offshore operations brings new and more complex technical challenges due to the harsh conditions encountered at these water depths. In particular, temperature around 2°C and pressure up to 400 Bars are not uncommon at the mud line. The drilling fluid, while flowing through the well, will experience temperatures from 0°C to 150°C and must keep its properties for this whole range of temperatures. The mud rheological properties will strongly depend on the temperature and pressure variations, and also on mud formulations. This work is an experimental study of the influence of temperature and pressure variations on various muds rheology. Rheological characterizations were performed with laboratory rheometers down to temperatures as low as 0 °C. Various oil based muds were investigated. Rheological properties of the base oil were measured and correlated with the mud properties. This was used to determine the influence of the nature of the based oil and of the type of additives present in the formulation. Gelation phenomena occurrence was evidenced for some formulations, and the kinetic of gelation was quantified by using specific experimental setup. Mathematical laws were established to characterize and predict the temperature and pressure dependency of oil based mud rheology. The influence of the mud rheology temperature and pressure dependency on down-hole pressures prediction was demonstrated by comparing simulations to field data.

References

5