Cut-and-paste customization of organic FET integrated circuit and its application to electronic artificial skin

Hiroshi Kawaguchi, Takao Someya, Tsuyoshi Sekitani, T. Sakurai

IEEE Journal of Solid-State Circuits · 2005 · 127 citations · 7 references

Concepts

TL;DR

The paper introduces cut‑and‑paste customization for flexible organic FET integrated circuits and applies it to electronic artificial skin. The skin is built from a pressure‑sensor array, row and column decoders using wired‑NAND circuits, and is assembled by cutting and pasting circuit sections with plastic tape, enabling scalable size. The circuits were designed with SPICE and layout tools and their operation was confirmed by measurement.

Abstract

The concept of cut-and-paste customization is introduced for the first time in designing integrated circuits based on mechanically flexible organic field-effect transistors, and is applied to electronic artificial skin. The electronic artificial skin comprise of three separate integrated circuits that are a pressure-sensor array, row decoders, and column selectors to read out pressure information over a large area. All of three integrated circuits are scalable in size because the pressure-sensor array is a simple repetition of sensor cells and the row and column decoders adopt wired-NAND circuits, which enables the cut-and-paste customization in size. The physical cut-and-paste procedure is employed by cutting a part of the integrated circuits and pasting it to another integrated circuit with a connecting plastic tape. The integrated circuits are designed with a standard SPICE simulator and layout design tool, and the operation is confirmed by measurement.

References

7