Low Temperature Pyrolysis Characteristics of Oil Sludge under Various Heating Conditions

Abstract

Pyrolysis of oil sludge first by thermogravimetry/mass spectroscopy (TG/MS) and then in a horizontal quartz reactor with an electrical laboratory furnace under different pyrolysis conditions was carried out. The influence of heating rate from 5 to 20 °C·min-1, final pyrolysis temperature from 400 to 700 °C, various interval holding stage, and catalyst on the products were investigated in detail. The TG/MS results show that pyrolysis reaction of oil sludge starts at a low temperature of about 200 °C, and the maximum evolution rate is observed between the temperatures of 350−500 °C. A higher final pyrolysis temperature, an interval holding stage, and adding catalyst can promote the pyrolysis conversion (in terms of less solid residue production). In all parameters, an interval holding stage for 20 min near the peak temperature of 400 °C can enhance the yield of oil and improve its quality. Three additives used in this work as catalysts do not improve oil product quality markedly in spite of increasing pyrolysis conversion greatly.