Effect of source/drain overlap region on device performance in a‐IGZO thin‐film transistors

Abstract

Abstract— In this paper, the effect of source/drain overlap length on the amorphous indium gallium zinc oxide (a‐IGZO) TFT performance has been investigated. Results of this paper show that as source/drain overlap length decreases to a negative value forming S/D offset, the threshold voltage and S parameters of a‐IGZO TFTs increased and the field‐effect mobility decreased. The V T variation increases sharply as the channel length decreases because of the large resistance R offset when it is formed at a‐IGZO source/drain. In the experiment, R offset of each 1 μm, evaluated from the transfer length method (TLM), shows approximately 54–66 kΩ. This means thatthe source/drain overlap length is a very important control parameter for uniform device characteristics of a‐IGZO TFTs.