IEEE Transactions on Power Electronics · 2014 · 146 citations · 27 references
EngineeringElectrical EngineeringCircuit TheoryEnergy SystemsPower ElectronicsAc-dc ConvertersConverter TopologiesDc-dc ConversionDc-dc ConvertersHigh-frequency Power ConversionPower SystemsConversion StagesConverter Topology DesignDc-dc Converter TopologiesMatrix ConvertersPower ConversionPower Conversion StagesPower Converter DesignPower Electronic Converters
Typical inductive power transfer (IPT) systems employ two power conversion stages to generate a high-frequency primary current from low-frequency utility supply. This paper proposes a matrix-converter-based IPT system, which employs high-speed SiC devices to facilitate the generation of high-frequency current through a single power conversion stage. The proposed matrix converter topology transforms a three-phase low-frequency voltage system to a high-frequency single-phase voltage, which, in turn, powers a series compensated IPT system. A comprehensive mathematical model is developed and power losses are evaluated to investigate the efficiency of the proposed converter topology. Theoretical results are presented with simulations, which are performed in MATLAB/Simulink, in comparison to a conventional two-stage converter. Experimental evident of a prototype IPT system is also presented to demonstrate the applicability of the proposed concept.
27
Design and analysis of an adaptive transcutaneous power telemetry for biomedical implants
Guoxing Wang, Wentai Liu, Mohanasankar Sivaprakasam et al. · IEEE Transactions on Circuits and Systems I Fundamental Theory and Applications · 2005 · 433 citations
Engineering, Biomedical Engineering, Electrical Engineering +16