Low-cost and facile fabrication of titanium dioxide coated oxidized titanium diboride–epoxy resin composites with high dielectric constant and extremely low dielectric loss

Longcheng Gu, Tongxing Wang, Wei Zhang, Guozheng Liang, Aijuan Gu, Li Yuan

RSC Advances · 2013 · 28 citations · 29 references

Concepts

Abstract

A series of titanium dioxide (TiO2) coated titanium diboride (TiB2) particles, On-TiB2, were facilely prepared using an oxidation process; interestingly, the surface morphology of TiO2 on TiB2 can be controlled from some unconnected TiO2 particles to a full coating of TiO2 by simply adjusting the oxidation time. Based on the synthesis of On-TiB2, On-TiB2–epoxy (EP) resin composites with high dielectric constant and very low dielectric loss are developed. The influences of the structure and content of On-TiB2 on the electric and dielectric properties of On-TiB2–EP composites were intensively studied, and the corresponding study on TiB2–EP composites was also carried out for comparison. Results show that the dielectric properties of On-TiB2–EP composites are greatly dependent on the oxidation time for preparing On-TiB2 and the content of On-TiB2 used. 20 min is proved to be the optimum oxidation time, the structure of the resultant fillers (O20-TiB2) shows that lots of TiO2 particles exist on the surface of TiB2 but do not form a full coating. For the composite with 25 vol% O20-TiB2, the dielectric constant is as high as 407 (at 1 Hz), about 1.8 times of the maximum value that can be reached by the TiB2–EP composites; meanwhile, the dielectric loss of the O20-TiB2–EP composite is as low as 1.5 (at 1 Hz), only about 0.06 times of the corresponding value of the TiB2–EP composite. Two different equivalent circuit models are setup for O20-TiB2–EP and TiB2–EP composites to evaluate the nature behind these attractive results.

References

29