Characteristics of Surfaces Machined With Abrasive-Waterjets

M. Hashish

Journal of Engineering Materials and Technology · 1991 · 158 citations · 0 references

Concepts

TL;DR

Surface machining with abrasive‑waterjets produces characteristic surface texture and integrity effects, including particle deposition, delamination, gouging, microstructural changes, cracking, chipping, work hardening, and heat‑affected zones. The study reviews data from multiple machining operations—cutting, milling, turning, drilling—on advanced materials, examining how AWJ parameters influence surface texture and integrity, noting that particle deposition can be cleaned away and minor work hardening can be avoided when cutting wear dominates. The results show that abrasive particle size is the key factor controlling surface finish, while AWJ parameters affect waviness, kerf taper, and burr height; minor work hardening can be avoided, and overall AWJ machining produces only controllable texture changes without compromising material integrity.

Abstract

The general characteristics of surfaces machined with abrasive-waterjets (AWJs) are discussed in terms of surface texture and surface integrity. Data are presented from several studies involving different machining operations, including cutting, milling, turning, and drilling, and various advanced materials. The effects of AWJ parameters on surface texture effects, such as waviness, kerf taper, and burr height, in thin sheet metals typically used in the aerospace industry are presented and discussed. Other surface texture parameters, including surface finish and lay, are also addressed for selected machining applications such as milling and turning. Abrasive particle size is found to be the dominant parameter affecting the surface finish. The surface integrity effects are defined as particle deposition, delamination, gouging, microstructural changes, cracking, chipping, work hardening, and heataffected zones. Particle deposition occurs in the machining of ductile materials, but deposited particles can easily be removed by cleaning. Minor work hardening may result but can be totally eliminated if the dominant material removal mechanism is the cutting wear mode, which prevails under certain jet and traverse conditions. Thus, although the machining of advanced materials with AWJs may result in minor but controllable surface texture effects, it does not generally affect the integrity of the material.