Journal of Engineering for Gas Turbines and Power · 2013 · 16 citations · 10 references
EngineeringAerospace EngineeringMechanical EngineeringCombustionInternal Combustion EnginesOpticsCombustion AnalysisCombustion FundamentalsCombustion In EnginesCombustion ProcessesLaser OpticsSoot FormationAir-fuel RatioAir-fuel Ratio EffectsLaser-induced IncandescenceLean Burn OperationLean-burn CombustionLow-emission CombustionSmoke FormationSmoke Layer Formation
For lean burn combustor development in low emission aero-engines, the pilot stage of the fuel injector plays a key role with respect to stability, operability, NOx emissions, and smoke production. Therefore it is of considerable interest to characterize the pilot module in terms of pilot zone mixing, fuel placement, flow field, and interaction with the main stage. This contribution focuses on the investigation of soot formation during pilot-only operation. Optical test methods were applied in an optically accessible single sector rig at engine idle conditions. Using planar laser-induced incandescence (LII), the distribution of soot and its dependence on air/fuel ratio, as well as geometric injector parameters, was studied. The data shows that below a certain air/fuel ratio, an increase of soot production occurs. This is in agreement with smoke number measurements in a standard single sector flame tube rig without optical access. Reaction zones were identified using chemiluminescence of OH radicals. In addition, the injector flow field was investigated with PIV. A hypothesis regarding the mechanism of pilot smoke formation was made based on these findings. This along with further investigations will form the basis for developing strategies for smoke improvement at elevated pilot-only conditions.
10
Development of Lean-Burn Low-NOx Combustion Technology at Rolls-Royce Deutschland
W. Lazik, Th. Doerr, Sebastian Bake et al. · 2008 · 104 citations
Engineering, Aerospace Engineering, Mechanical Engineering +17
Laser-induced incandescence for soot diagnostics at high pressures
M. Hofmann, Wolfgang G. Bessler, Christof Schulz et al. · Applied Optics · 2003 · 103 citations