Optics Express · 2010 · 10 citations · 6 references
Natural SciencesMaterials EngineeringMaterials ScienceOptical MaterialsOptoelectronicsSemiconductor MaterialsDetector TechnologyInfrared DetectorsInfrared Optical MaterialsInfrared SpectroscopyOptical DetectorsThermal Properties Of SemiconductorsAbsorber MaterialsDetectorsLead SelenideMid-infrared MaterialsNoise SourcesNoise Sources In DetectorsThermal DetectorsThermal Infrared Detectors
The performance of thermal detectors is derived for devices incorporating materials with non-uniform spectral absorption. A detector designed to have low absorption in the primary thermal emission band at a given temperature will have a background-limited radiation noise well below that of a blackbody absorber, which is the condition typically assessed for ultimate thermal detector performance. Specific examples of mid-wave infrared (ʎ ∼ 3-5 μm) devices are described using lead selenide as a primary absorber with optical cavity layers that maximize coupling. An analysis of all significant noise sources is presented for two example room-temperature devices designed to have detectivities up to 4.37 × 10(10) cm Hz(1/2) W(-1), which is a factor 3.1 greater than the traditional blackbody limit. An alternative method of fabricating spectrally selective devices by patterning a plasmonic structure in silver is also considered.
6
Optical properties of metallic films for vertical-cavity optoelectronic devices
Aleksandar D. Rakić, Aleksandra B. Djurišić, J. Elazar et al. · Applied Optics · 1998 · 4.2K citations
Noise Limitations in Solid State Photodetectors
K. M. van Vliet · Applied Optics · 1967 · 93 citations
PbSe photodetector arrays for IR sensors
A. Muñóz, Juan Meléndez, M. C. Torquemada et al. · Thin Solid Films · 1998 · 61 citations