2002 · 10 citations · 1 references
EngineeringGeological EngineeringPetroleum EngineeringDrillingReservoir EngineeringSand ControlDrilling OperationsHorizontal Well CompletionsReservoir GeologySand Control Completion DesignWell CompletionWell Completion DesignCompletion DesignCompletion FluidsCompletion OptimizationCompletion StrategiesHorizontal Well Sand Control CompletionOpen Hole Completion DesignOpen Hole Gravel PackingOpen-hole Completion
Abstract The Alba reservoir (located in the Central N Sea) is a highly permeable, unconsolidated sand body with lenses of reactive shales within the reservoir sand. From the initial decision to exploit the field using horizontal wells there has been an evolutionary approach to selection of the most appropriate drilling fluid and completion technique. The development of the field has been marked by a drive to increase productivity and reduce the total cost of the ownership of the asset. The major challenges in completing wells on this field involve issues of sand control and inhibition of reactive reservoir shales. Initially, completions were prepacked screens in open hole and the fluid used to drill the reservoir section was oil based mud. Productivity was lower than expected but improvements were achieved by switching to sized salt water based mud and initiating a very stringent QC procedure for the drilling and completion fluids. However, screen failure occurred very soon after the wells became water cut and the wells almost invariably sanded up. More recent changes have involved a switch to sized calcium carbonate water based mud and open-hole gravel packs. Because the geology of the Alba field dictates that there is almost always some shale exposed in the open hole reservoir section it was found that the gravel carrier fluid needs to be equally as inhibitive as the drill-in fluid Since 1998 thirteen open-hole gravel packs have been successfully completed, in all cases with high flowrates and no history of sand production. This paper deals with the performance of the various techiques applied and details the best practices derived for optimum productivity and screen longevity.
1