Journal of Physics Conference Series · 2011 · 12 citations · 6 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationNanomaterialsNanotechnologyCarbon NanomaterialsNanomaterial CharacterizationNanoparticle CharacterizationNanoscale MaterialsNanotoxicologyParticle SizeAirborne ParticlesDiameter EffectsFibrous MaterialsFiltration SystemsNanoparticle Size DistributionNanoparticlesParticle Size CharacterizationUltrafine Particles
Due to the strong development of nanotechnologies, ultrafine particles could represent a growing hazard for workers health. When it is not possible to reduce the risk at its source, filtration systems are one of the means used to limit the exposure to hazardous substances such as airborne particles. The aim of this study is to measure the penetration of nanoparticles on a very large diameter range, from the nanometer size to the most penetrating particle size (MPPS). Here we present experimental results obtained for three different types of nanoparticles. Measurements of nanoparticle penetration through two low efficiency fiberglass media are carried out using two test benches presented in this article. Penetration values for carbon, copper and NaCl nanoparticles decreases with particle size, as predicted by theory. The value of the most penetrating particle size is situated between 100 and 300 nm. No thermal rebound was observed in this particle size range. The penetration values will be used, in further studies, to determine a global penetration model.
6
Filtration Efficiency of Aerosol Particles Below 20 Nanometers
Michael Heim, Benjamin J. Mullins, Markus Wild et al. · Aerosol Science and Technology · 2005 · 90 citations · Full text
Natural Sciences, Chemistry, Physics +16