SPE Annual Technical Conference and Exhibition · 2003 · 65 citations · 21 references
EngineeringGeologyPetroleum EngineeringPetrophysicsReservoir EngineeringSubsurface Fluid FlowCore AnalysisFluid SaturationPetrophysical EvaluationPorosity AnalysisReservoir HeterogeneityGas SaturationHeterogeneous ReservoirPlugsPore Network StructurePorosity In SandstonesResidual SaturationSaturationSpontaneous Imbibition
Abstract Residual gas saturation is considered to be a key factor in evaluating gas recovery from a lean gas reservoir invaded by water. Residual gas saturation is known to be dependent on both pore network characteristics and initial gas saturation. In this paper, sixty experimental relationships between initial gas saturation (Sgi) and residual gas saturation (Sgr) are presented for a large set of sandstone samples and checked against former empirical Sgr-Sgi laws. Previously, no more than two authors have presented more than twenty full experimental Sgr-Sgi relationships. The core plugs are selected from two different sandstone gas reservoirs and from Fontainebleau sandstone outcrop. Porosity and permeability plugs, respectively range from 0.06 to 0.25 and from 0.1 to 2000 mD, with Sgrm values ranging from 0.04 to 0.65. Two-phase Sgr is achieved by controlled evaporation - spontaneous imbibition methods. The main results are: Two-phase Sgr-Sgi experimental relationships have piecewise linear form, characterized by two parameters: the maximum residual gas saturation, Sgrm, and the saturation corresponding to the intersection of the two segments, Sgo. Sgo was found to be dependent on the amount of microporosity and different from Swir. The constant Sgr region confirms that the microporosity does not trap gas. The linear Sgr/Sgi region corresponds to gas trapped in the macroporosity. None of the hyperbolic laws is able to describe correctly the observed experimental behavior. Jerauld's and the simplified version of Land's relationships are the poorest estimates of Sgr as a function of Sgi. The best relationship to describe Sgr-Sgi curves is the piecewise linear Aissaoui's law. It results in a significantly better agreement with experimental data than Land's original formulation. Both forms rely on two fitting parameters. Our experimental results show that porosity (or permeability) and the amount of microporosity along with the initial gas saturation control Sgr values.
21