9th AIAA/ASME Joint Thermophysics and Heat Transfer Conference · 2006 · 33 citations · 9 references
EngineeringAerospace EngineeringMechanical EngineeringAerospace StructuresHeat TransferThermal AnalysisAircraft Structural RepairBoundary-layer StructurePlanetary Boundary LayerRepair Of Aerospace StructuresThermal Boundary LayersThermal DesignBoundary-layer TransitionExtravehicular ActivityNumerical Simulation Of Thermal Boundary LayersThermal Boundary ConditionsThermal ProtectionThermal Protection System RepairThermal Protection SystemsThermal-structural Analysis
The tool for predicting the onset of boundary layer transition from damage to and/or repair of the thermal protection system developed in support of Shuttle Return to Flight is compared to the STS-114 flight results. The Boundary Layer Transition (BLT) Tool is part of a suite of tools that analyze the aerothermodynamic environment of the local thermal protection system to allow informed disposition of damage for making recommendations to fly as is or to repair. Using mission specific trajectory information and details of each damage site or repair, the expected time of transition onset is predicted to help determine the proper aerothermodynamic environment to use in the subsequent thermal and stress analysis of the local structure. The boundary layer transition criteria utilized for the tool was developed from ground-based measurements to account for the effect of both protuberances and cavities and has been calibrated against flight data. Computed local boundary layer edge conditions provided the means to correlate the experimental results and then to extrapolate to flight. During STS-114, the BLT Tool was utilized and was part of the decision making process to perform an extravehicular activity to remove the large gap fillers. The role of the BLT Tool during this mission, along with the supporting information that was acquired for the on-orbit analysis, is reviewed. Once the large gap fillers were removed, all remaining damage sites were cleared for reentry as is. Post-flight analysis of the transition onset time revealed excellent agreement with BLT Tool predictions.
9
Thomas Horvath, Scott A. Berry, N. Ronald Merski et al. · 9th AIAA/ASME Joint Thermophysics and Heat Transfer Conference · 2006 · 52 citations · Full text
Engineering, Aerospace Engineering, Mechanical Engineering +17