IEEE Journal of Photovoltaics · 2013 · 13 citations · 34 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsSemiconductor Device MaterialsSemiconductor SurfacesSolar Cell MaterialsSolar CellsSurface ModificationSurface PassivationLight AbsorptionOptical PropertiesPassivationSurface Optical PropertiesSurface RecombinationTextured SurfacesThermally Grown OxidesWet Etching
Silicon solar cells typically feature textured surfaces on the front side to increase light absorption. An unwanted side effect of the texture is an increase in surface recombination compared with smoother surfaces. On the rear side of the solar cell, light absorption is not an issue; therefore, planar surfaces are used to decrease surface recombination. In processing, a planar surface can be achieved by wet chemical single-side etching of previously textured surfaces, resulting in a smoothed rear surface. This study investigates surface passivation of these chemically polished surfaces in dependence on the degree of smoothness. Surface passivation is achieved by thin thermally grown silicon oxides. Special focus is set on injection dependence and the influence of postmetallization annealing. Measured optical properties of different surfaces are compared with different optical simulation models. Finally, recombination and optical properties are connected to solar cell performance of fabricated passivated emitter and rear cells.
34
Illumination for computer generated pictures
Bui Tuong Phong · Communications of the ACM · 1975 · 3K citations · Full text
22.8% efficient silicon solar cell
Andrew Blakers, Aihua Wang, A.M. Milne et al. · Applied Physics Letters · 1989 · 725 citations