Environmental Progress & Sustainable Energy · 2011 · 35 citations · 48 references
EngineeringChemical EngineeringEnvironmental EngineeringSurface ScienceWastewater TreatmentWater TreatmentAdsorption At InterfacesAdsorption ProcessesSurface AdsorptionAdsorbent CharacterizationAdsorption ChemistryConcentrationContact Time EffectsSorption IsothermsUranium Removal
Abstract A fundamental investigation on the removal of uranium from aqueous solutions by wheat straw was conducted in batch conditions. The influence of different experimental parameters such as modified methods, pH, contact time, adsorbent dose, initial concentration, and temperature, on the kinetics of uranium removal was studied. The results showed that the higher adsorption rate of uranium on wheat straw was modified by NaOH. At 303 K and pH was 3.0, the saturation adsorption was up to 1.20 mg/g at approximately 120 min. The uranium uptake was quantitatively evaluated using sorption isotherms and the correlation coefficients showed that the Freundlich model gave a better fit than the Langmuir equation. The process followed a pseudo‐second‐order kinetics. Scanning electron microscope coupled with Fourier transform infrared analysis for wheat straw, demonstrated that uranium‐containing sites existed on the surface structure with hydroxyl, carbonyl, PO and SiO groups. © 2011 American Institute of Chemical Engineers Environ Prog, 2011
48
The sorption of lead(II) ions on peat
Yuh‐Shan Ho, Gordon McKay · Water Research · 1999 · 1.1K citations
Ping Sheng, Yen‐Peng Ting, J. Paul Chen et al. · Journal of Colloid and Interface Science · 2004 · 1.1K citations
Life Sciences, Environmental Engineering, Marine Sciences +12