Journal of Applied Physics · 2011 · 74 citations · 16 references
EngineeringMaterials EngineeringMaterials SciencePolymer ChemistrySemiconductor DevicesSemiconductor MaterialsCoatingsLight-emitting DiodesOrganic SemiconductorsPhotovoltaic DevicesPolymer Thin FilmsSolar CellsLuminanceOrganic ElectronicsOrganic Light-emitting DiodesOrganic PhotovoltaicsOrganic Solar CellsPower Conversion EfficiencyRoll-to-roll CoatingSolar Cell Fabrication
A continuous roll-to-roll compatible blade-coating method for multi-layers of general organic semiconductors is developed. Dissolution of the underlying film during coating is prevented by simultaneously applying heating from the bottom and gentle hot wind from the top. The solvent is immediately expelled and reflow inhibited. This method succeeds for polymers and small molecules. Uniformity is within 10% for 5 cm by 5 cm area with a mean value of tens of nanometers for both organic light-emitting diode (OLED) and solar cell structure with little material waste. For phosphorescent OLED 25 cd/A is achieved for green, 15 cd/A for orange, and 8 cd/A for blue. For fluorescent OLED 4.3 cd/A is achieved for blue, 9 cd/A for orange, and 6.9 cd/A for white. For OLED with 2 cm by 3 cm active area, the luminance variation is within 10%. Power conversion efficiency of 4.1% is achieved for polymer solar cell, similar to spin coating using the same materials. Very-low-cost and high-throughput fabrication of efficient organic devices is realized by the continuous blade-only method.
16
White organic light-emitting diodes with fluorescent tube efficiency
Sebastian Reineke, Frank Lindner, Gregor Schwartz et al. · Nature · 2009 · 3.5K citations