Inorganic Chemistry · 2013 · 110 citations · 63 references
EngineeringMaterials EngineeringMaterials ScienceMaterials ChemistrySemiconductor MaterialsSensorsGas SensorsInorganic MaterialsPorous CeramicsSemiconductor Device MaterialsSensor MaterialsTemperature SensorsAmorphous OxidesHigh-temperature Device OperationMetal Oxide Gas SensorsMetal Oxide Sensor MaterialsOxygen-bearing SpeciesRoom Temperature Gas SensorsSemiconductor Gas SensorsSensing
Semiconductor-based sensors have played an important role in efficient detection of combustible, flammable, and toxic gases, but they usually need to operate at elevated temperatures (200 °C or higher). Although reducing the operation temperature down to room temperature is of practical significance, it is still a huge challenge to fabricate room temperature sensors with a low cost. Here we show a novel "self-doping" strategy to overcome simultaneously both difficulties of "high resistance" and "low reaction rate", which have always been encountered for room-temperature operation of semiconductor-based sensors. In particular, a porous crystalline titania with heavily self-doped Ti(3+) species has been prepared by using a porous amorphous TiO2 and urea as the starting materials. The resulting Ti(3+) self-doped TiO2 material serves as an efficient room-temperature gas-sensing material for specific CO detection with fast response/recovery. The self-dopant (Ti(3+)) in the titania material has proved to decrease the resistance of TiO2 significantly on the one hand and to increase the chemisorbed oxygen species substantially, thus enhancing the surface reaction activity on the other. Such a self-doping concept is anticipated to give a fresh impetus to rational design of room-temperature sensing devices with low costs.
63
Fabrication and ethanol sensing characteristics of ZnO nanowire gas sensors
Qing Wan, Q. H. Li, Yujin Chen et al. · Applied Physics Letters · 2004 · 2K citations
Detection of CO and O<sub>2</sub> Using Tin Oxide Nanowire Sensors
Andrei Kolmakov, Yuxuan Zhang, Guosheng Cheng et al. · Advanced Materials · 2003 · 1K citations