Chemical vapor deposition of Ru thin films by direct liquid injection of Ru(OD)3 (OD=octanedionate)

Junghyun Lee, Jooyoung Kim, Shi‐Woo Rhee, Dooyoung Yang, Donghyun Kim, Cheol‐Hoon Yang, Young-Ki Han, Chul-Ju Hwang

Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · 2000 · 20 citations · 10 references

DOIFull text

Open access

Concepts

Abstract

Pure Ru thin films were deposited on Si substrate using Ru (OD)3 (OD = octanedionate) as a new liquid precursor with a newly designed warm wall reactor by metalorganic chemical vapor deposition (MOCVD). Resistivity and film structure were largely dependent on MOCVD process parameters such as deposition temperature, O2/(O2+Ar) ratio, and reactor pressure. With the increase of O2/(O2+Ar) ratio, minimum resistivity (20 μΩ cm) was obtained and then the resistivity was increased due to the abnormal increase of surface roughness. By modifying the position of a single quartz injector, uniform deposition of Ru thin films on an 8 in. Si wafer could be obtained.

References

10