IEEE Journal of Solid-State Circuits · 2005 · 68 citations · 9 references
EngineeringElectrical EngineeringLow-power DesignMicroelectronicsMicrowave EngineeringCmos Circuit DesignIntegrated Circuit DesignMicrowave Integrated CircuitsMillimeter-wave CommunicationsPower DividersRadio-frequency Integrated CircuitsCmos Radio-frequency CircuitsHigh-frequency ElectronicsLow-voltage Cmos DesignMicrowave Integrated Circuit DesignMillimeter-wave Integrated CircuitsPower ConsumptionRadio-frequency Integrated Circuit DesignRf Cmos Design
A microwatt frequency divider for the 2.5-GHz ISM band is proposed. This divider directly modulates the output in a ring oscillator by means of a switch and realizes low power consumption with low supply voltage and a wide locking range. It is fabricated using a five-layer-metal and 0.2-/spl mu/m-gate length CMOS process. The core size is 10.8/spl times/10.5 /spl mu/m/sup 2/, which is much smaller than that of a typical inductor-enhanced frequency divider. This divider operates with a supply voltage in the range from 1.8 to 0.7V, and attains minimum power consumption of 44 /spl mu/W, in which case the supply voltage is 0.7 V, the maximum operating frequency is 4.3 GHz, and the locking range is 2.3 GHz. A derivation of the frequency locking range of the divider is provided in the Appendix.
9
Sensor networks: Evolution, opportunities, and challenges
Chee-Yee Chong, Sanjeev Kumar · Proceedings of the IEEE · 2003 · 3.1K citations